Buyer Resources
- 1930 Ford Model A Phaeton Hot Rod
- 350ci V8
- Triple 2-Barrel Carburetors
- Automatic Transmission
- RWD
- Red Exterior
- Tan Interior
- Tan Convertible Soft Top
- Triple Polished Velocity Stacks
- Aftermarket Intake Manifold
- Tubular Exhaust Headers
- Side-Exit Exhaust
- Aluminum Radiator
- Electric Cooling Fan
- Aftermarket Ignition System
- Aftermarket Gauges
- Woodgrain Dashboard
- 3-Spoke Steering Wheel
- Reupholstered Interior
- Aftermarket Wheels
- Dropped Front Axle
- Front Disc Brakes
- Chopped Top Removed
This 1930 Ford Model A Phaeton Hot Rod takes the simplicity of early Ford design and turns it into a traditional open-wheel hot rod with a strong period-inspired attitude. Finished in red over a tan interior, it is powered by a 350ci V8 topped with triple 2-barrel carburetors and paired with an automatic transmission. The chopped top has been removed, leaving a more open profile beneath the tan convertible soft top, while the exposed engine, staggered aftermarket wheels, dropped front axle, and side-exit exhaust give the car the unmistakable stance and mechanical presence enthusiasts expect from a classic hot rod build.
Exterior and Interior
The exterior of this 1930 Ford Model A Phaeton Hot Rod is finished in red and embraces a stripped-down, open-wheel aesthetic. The exposed front suspension, dropped front axle, front disc brakes, and aftermarket wheels create a purposeful stance, while the tubular exhaust headers feed directly into side-exit exhausts that run along the body. Triple polished velocity stacks rise above the exposed V8, adding a strong visual focal point, and the tan convertible soft top gives the car a more traditional touring-car silhouette when raised. The interior of this 1930 Ford Model A Phaeton Hot Rod is finished in tan and has been reupholstered, blending custom touches with the sparse simplicity of an early Ford. A woodgrain dashboard houses aftermarket gauges, while a 3-spoke steering wheel gives the driver a clean, straightforward interface. The overall cabin remains minimalist and mechanical in character, fitting the car’s old-school hot rod theme without overcomplicating the experience.
Engine
Powering this 1930 Ford Model A Phaeton Hot Rod is a 350ci V8 equipped with triple 2-barrel carburetors, an aftermarket intake manifold, and triple polished velocity stacks. Tubular headers and side-exit exhausts give the engine a direct, traditional hot rod breathing setup, while an aluminum radiator and electric cooling fan support the upgraded powertrain. An aftermarket ignition system handles spark duties, and power is sent to the rear wheels through an automatic transmission. Combined with the dropped front axle and open-wheel configuration, the drivetrain gives this Model A the raw, mechanical character that defines a traditional street rod.
This 1930 Ford Model A Phaeton Hot Rod takes the simplicity of early Ford design and turns it into a traditional open-wheel hot rod with a strong period-inspired attitude. Finished in red over a tan interior, it is powered by a 350ci V8 topped with triple 2-barrel carburetors and paired with an automatic transmission. The chopped top has been removed, leaving a more open profile beneath the tan convertible soft top, while the exposed engine, staggered aftermarket wheels, dropped front axle, and side-exit exhaust give the car the unmistakable stance and mechanical presence enthusiasts expect from a classic hot rod build.
This 1931 Ford Model A 3-Window Coupe Hot Rod “Phantom” takes the unmistakable silhouette of an early Ford and transforms it into a fully customized, award-winning hot rod. Showing just 291 miles, the build centers around a custom “Phantom” 3-window coupe body mounted to a hand-built frame, with dramatic details including a suicide front end, custom flame graphics, skull grille artwork, and a purpose-built stance. Its 327ci V8, six-carburetor intake setup, Muncie 4-speed manual, side-exit exhaust, and staggered wheel-and-tire combination give the car the mechanical personality to match its appearance. Rather than simply recreating a traditional Model A, this build embraces the show-car side of American hot-rodding with extensive customization throughout.
This 1930 Ford Model A Coupe Street Rod is the kind of build that rewards a closer look, because the craftsmanship underneath is every bit as important as the period hot-rod silhouette above it. Showing approximately 1,788 miles, this custom rotisserie-built coupe pairs a 350ci Goodwrench V8 crate engine with GM electronic fuel injection and a TH350 3-speed automatic transmission, giving the car the response and reliability of a much newer setup without taking away from its traditional street-rod character. The chassis has been thoroughly reworked with a custom fully boxed frame, Ford 9-inch rear end, rack-and-pinion steering, power front disc brakes, and rear 4-link suspension with coilovers. Finished in two-tone Gray and Silver over a Gray and Charcoal interior, it also wears Magnum 500 wheels with Coker Classic whitewalls and carries a red-accented undercarriage that turns the underside into part of the show.
This 1930 Ford Model A Phaeton Hot Rod takes the simplicity of early Ford design and turns it into a traditional open-wheel hot rod with a strong period-inspired attitude. Finished in red over a tan interior, it is powered by a 350ci V8 topped with triple 2-barrel carburetors and paired with an automatic transmission. The chopped top has been removed, leaving a more open profile beneath the tan convertible soft top, while the exposed engine, staggered aftermarket wheels, dropped front axle, and side-exit exhaust give the car the unmistakable stance and mechanical presence enthusiasts expect from a classic hot rod build.
This 1965 Ford Mustang Hardtop is the kind of early pony car that gets straight to the point: a compact coupe, a small-block Ford V8, a four-speed manual, and rear-wheel drive. Showing approximately 17,433 miles, this example is finished in Caspian Blue over a black reupholstered interior and keeps the classic Mustang recipe intact while adding just enough personalization to make it feel more driver-focused. The 289ci V8, Hurst shifter, manual gearbox, and clean first-generation styling give it the sort of analog character that makes these cars so enjoyable even decades later.
This 1967 Ford Mustang GTA Restomod takes the classic first-generation Mustang formula and adds a serious catalog of modern performance and comfort upgrades. Showing approximately 301 miles, this example has received an extensive refresh centered around a 347ci Blueprint Engines stroker V8 rated at 440 horsepower, an AOD heavy-duty performance automatic, and a 3.55 Posi-Traction rear differential. Its mechanical upgrades are matched by a thoroughly updated cabin with Procar reclining seats, Dakota Digital instrumentation, Vintage Air, power windows, and a modernized audio system, making this a far more capable and usable take on the original GTA recipe.
This 1930 Ford Model A Phaeton Hot Rod takes the simplicity of early Ford design and turns it into a traditional open-wheel hot rod with a strong period-inspired attitude. Finished in red over a tan interior, it is powered by a 350ci V8 topped with triple 2-barrel carburetors and paired with an automatic transmission. The chopped top has been removed, leaving a more open profile beneath the tan convertible soft top, while the exposed engine, staggered aftermarket wheels, dropped front axle, and side-exit exhaust give the car the unmistakable stance and mechanical presence enthusiasts expect from a classic hot rod build.
This 1928 Plymouth Model Q Delivery Street Rod takes the distinctive commercial-body styling of an early Plymouth and gives it a decidedly custom street-rod personality. Showing 20,060 miles, it combines a 351ci Windsor V8 with a C6 3-speed automatic transmission and rear-wheel drive, delivering a traditional American hot-rod powertrain in a far less common body style than the usual coupe or roadster. Its blue and Merlot two-tone exterior, custom flame graphics, hand-painted rear quarter artwork, aftermarket air conditioning, and reupholstered interior make this a highly personalized build with plenty of visual character.
This 1931 Ford Model A 3-Window Coupe Hot Rod “Phantom” takes the unmistakable silhouette of an early Ford and transforms it into a fully customized, award-winning hot rod. Showing just 291 miles, the build centers around a custom “Phantom” 3-window coupe body mounted to a hand-built frame, with dramatic details including a suicide front end, custom flame graphics, skull grille artwork, and a purpose-built stance. Its 327ci V8, six-carburetor intake setup, Muncie 4-speed manual, side-exit exhaust, and staggered wheel-and-tire combination give the car the mechanical personality to match its appearance. Rather than simply recreating a traditional Model A, this build embraces the show-car side of American hot-rodding with extensive customization throughout.
Terms of Service
Be Kind and Courteous
We're here to create a platform to better the automotive industry through communication and transparency. Please treat everyone with respect. Healthy debates are natural, but kindness is required.
No Hate Speech
Make sure everyone feels safe. Hate speech of any kind is strictly prohibited. Degrading comments about things like race, religion, culture, sexual orientation, etc. will not be tolerated.
No Promotions or Spam
Give more than you take. Self-promotion, spam, or links of any kind are not allowed.
