- 1929 Ford Model A Roadster Hot Rod
- 327ci V8
- Electronic Fuel Injection
- 3-Speed Automatic
- RWD
- Yellow Exterior
- Black/Yellow Diamond-Stitched Interior
- Black Convertible Soft Top
- Custom Pinstriping
- Reupholstered Interior
- Polished Aluminum Valve Covers
- Chrome Open-Element Air Cleaner
- Custom Bucket Seats
- Three-Point Seat Belts
- Blaupunkt Audio System
- Tilt Steering Column
- Billet Steering Wheel
- Polished Aluminum Wheels
- Dual Exhaust
- Custom Chassis
- Custom Hot Rod Body
Hot rods represent one of the purest forms of American automotive enthusiasm, blending classic pre-war styling with modernized performance and drivability. This 1929 Ford Model A Roadster Hot Rod embodies that spirit perfectly, combining iconic open-top roadster looks with the reliability and power of a Chevrolet-sourced 327ci V8. Showing approximately 23,389 miles, this custom-built machine offers an ideal balance of show-quality presentation and road-going enjoyment. Finished in a vibrant yellow exterior with matching interior accents, this roadster captures attention wherever it goes while delivering a traditional hot rod experience backed by electronic fuel injection and automatic transmission convenience.
Exterior and Interior
The exterior of this 1929 Ford Model A Roadster Hot Rod is finished in Bright Yellow and immediately commands attention with its unmistakable street rod presence. Classic Model A proportions are enhanced by custom pinstriping, polished wheels, exposed engine compartment, and a low-slung stance that perfectly captures the spirit of traditional American hot rods. A black convertible soft top provides weather protection when needed, while the shaved, streamlined appearance and dual exhaust outlets contribute to the car’s clean, purposeful look. Every angle showcases the craftsmanship and personality that make custom-built roadsters such enduring favorites among enthusiasts. The interior of this 1929 Ford Model A Roadster Hot Rod has been fitted with a recently refreshed black and yellow diamond-stitched upholstery package that complements the exterior finish beautifully. Custom bucket seats provide a comfortable seating position, while modern three-point seat belts enhance occupant safety. A billet steering wheel and tilt steering column add a contemporary touch to the driving experience, and a Blaupunkt audio system offers modern entertainment capability. The cabin strikes an excellent balance between classic hot rod character and modern comfort, creating an inviting space for cruising, car shows, and weekend drives.
Engine
Powering this 1929 Ford Model A Roadster Hot Rod is a Chevrolet 327ci V8 equipped with electronic fuel injection, offering improved reliability, easier starting, and smoother operation than traditional carbureted setups. Polished aluminum valve covers and a chrome open-element air cleaner enhance the engine bay’s appearance while showcasing the vehicle’s hot rod character. Power is sent to the rear wheels through a 3-speed automatic transmission, providing relaxed cruising manners and easy drivability. Supported by a custom chassis and complemented by a dual exhaust system, this roadster delivers the unmistakable sound, performance, and personality that have made American hot rods enduring automotive icons.
This 1930 Ford Model A Phaeton Hot Rod takes the simplicity of early Ford design and turns it into a traditional open-wheel hot rod with a strong period-inspired attitude. Finished in red over a tan interior, it is powered by a 350ci V8 topped with triple 2-barrel carburetors and paired with an automatic transmission. The chopped top has been removed, leaving a more open profile beneath the tan convertible soft top, while the exposed engine, staggered aftermarket wheels, dropped front axle, and side-exit exhaust give the car the unmistakable stance and mechanical presence enthusiasts expect from a classic hot rod build.
This 1931 Ford Model A 3-Window Coupe Hot Rod “Phantom” takes the unmistakable silhouette of an early Ford and transforms it into a fully customized, award-winning hot rod. Showing just 291 miles, the build centers around a custom “Phantom” 3-window coupe body mounted to a hand-built frame, with dramatic details including a suicide front end, custom flame graphics, skull grille artwork, and a purpose-built stance. Its 327ci V8, six-carburetor intake setup, Muncie 4-speed manual, side-exit exhaust, and staggered wheel-and-tire combination give the car the mechanical personality to match its appearance. Rather than simply recreating a traditional Model A, this build embraces the show-car side of American hot-rodding with extensive customization throughout.
This 1930 Ford Model A Coupe Street Rod is the kind of build that rewards a closer look, because the craftsmanship underneath is every bit as important as the period hot-rod silhouette above it. Showing approximately 1,788 miles, this custom rotisserie-built coupe pairs a 350ci Goodwrench V8 crate engine with GM electronic fuel injection and a TH350 3-speed automatic transmission, giving the car the response and reliability of a much newer setup without taking away from its traditional street-rod character. The chassis has been thoroughly reworked with a custom fully boxed frame, Ford 9-inch rear end, rack-and-pinion steering, power front disc brakes, and rear 4-link suspension with coilovers. Finished in two-tone Gray and Silver over a Gray and Charcoal interior, it also wears Magnum 500 wheels with Coker Classic whitewalls and carries a red-accented undercarriage that turns the underside into part of the show.
This 1930 Ford Model A Phaeton Hot Rod takes the simplicity of early Ford design and turns it into a traditional open-wheel hot rod with a strong period-inspired attitude. Finished in red over a tan interior, it is powered by a 350ci V8 topped with triple 2-barrel carburetors and paired with an automatic transmission. The chopped top has been removed, leaving a more open profile beneath the tan convertible soft top, while the exposed engine, staggered aftermarket wheels, dropped front axle, and side-exit exhaust give the car the unmistakable stance and mechanical presence enthusiasts expect from a classic hot rod build.
This 1965 Ford Mustang Hardtop is the kind of early pony car that gets straight to the point: a compact coupe, a small-block Ford V8, a four-speed manual, and rear-wheel drive. Showing approximately 17,433 miles, this example is finished in Caspian Blue over a black reupholstered interior and keeps the classic Mustang recipe intact while adding just enough personalization to make it feel more driver-focused. The 289ci V8, Hurst shifter, manual gearbox, and clean first-generation styling give it the sort of analog character that makes these cars so enjoyable even decades later.
This 1967 Ford Mustang GTA Restomod takes the classic first-generation Mustang formula and adds a serious catalog of modern performance and comfort upgrades. Showing approximately 301 miles, this example has received an extensive refresh centered around a 347ci Blueprint Engines stroker V8 rated at 440 horsepower, an AOD heavy-duty performance automatic, and a 3.55 Posi-Traction rear differential. Its mechanical upgrades are matched by a thoroughly updated cabin with Procar reclining seats, Dakota Digital instrumentation, Vintage Air, power windows, and a modernized audio system, making this a far more capable and usable take on the original GTA recipe.
This 1930 Ford Model A Phaeton Hot Rod takes the simplicity of early Ford design and turns it into a traditional open-wheel hot rod with a strong period-inspired attitude. Finished in red over a tan interior, it is powered by a 350ci V8 topped with triple 2-barrel carburetors and paired with an automatic transmission. The chopped top has been removed, leaving a more open profile beneath the tan convertible soft top, while the exposed engine, staggered aftermarket wheels, dropped front axle, and side-exit exhaust give the car the unmistakable stance and mechanical presence enthusiasts expect from a classic hot rod build.
This 1928 Plymouth Model Q Delivery Street Rod takes the distinctive commercial-body styling of an early Plymouth and gives it a decidedly custom street-rod personality. Showing 20,060 miles, it combines a 351ci Windsor V8 with a C6 3-speed automatic transmission and rear-wheel drive, delivering a traditional American hot-rod powertrain in a far less common body style than the usual coupe or roadster. Its blue and Merlot two-tone exterior, custom flame graphics, hand-painted rear quarter artwork, aftermarket air conditioning, and reupholstered interior make this a highly personalized build with plenty of visual character.
This 1931 Ford Model A 3-Window Coupe Hot Rod “Phantom” takes the unmistakable silhouette of an early Ford and transforms it into a fully customized, award-winning hot rod. Showing just 291 miles, the build centers around a custom “Phantom” 3-window coupe body mounted to a hand-built frame, with dramatic details including a suicide front end, custom flame graphics, skull grille artwork, and a purpose-built stance. Its 327ci V8, six-carburetor intake setup, Muncie 4-speed manual, side-exit exhaust, and staggered wheel-and-tire combination give the car the mechanical personality to match its appearance. Rather than simply recreating a traditional Model A, this build embraces the show-car side of American hot-rodding with extensive customization throughout.
Terms of Service
Be Kind and Courteous
We're here to create a platform to better the automotive industry through communication and transparency. Please treat everyone with respect. Healthy debates are natural, but kindness is required.
No Hate Speech
Make sure everyone feels safe. Hate speech of any kind is strictly prohibited. Degrading comments about things like race, religion, culture, sexual orientation, etc. will not be tolerated.
No Promotions or Spam
Give more than you take. Self-promotion, spam, or links of any kind are not allowed.
