- 1930 Ford Model A Roadster Street Rod
- 327ci V8
- 4-Barrel Carburetor
- 3-Speed Automatic
- RWD
- Red Exterior
- Black Interior
- Black Convertible Soft Top
- Suicide Doors
- Louvered Hood
- Aftermarket Exhaust
- Aftermarket Wheels
- Aftermarket Sound System
- JVC Audio Head Unit
- Street Rod Chassis Build
Hot rods represent one of the purest forms of American automotive enthusiasm, blending classic styling with modernized performance and drivability. This 1930 Ford Model A Roadster Street Rod shows 25,762 miles and has been transformed from an early Ford into a striking custom cruiser. Finished in vibrant red over a black interior, this roadster combines the unmistakable silhouette of a Model A with the power and reliability of a Chevrolet V8. Features such as a street rod chassis build, custom exhaust, aftermarket audio system, and a folding soft top make this a vehicle that can be enjoyed both at local shows and on weekend drives.
Exterior and Interior
The exterior of this 1930 Ford Model A Roadster Street Rod is finished in bright red and showcases the timeless proportions that have made Model A-based hot rods popular for generations. A louvered hood adds both visual appeal and improved engine bay ventilation, while suicide doors contribute to the car’s vintage character. The roadster body is complemented by a black folding convertible soft top that allows for open-air cruising when desired. Aftermarket wheels provide a custom touch and give the car a stance that perfectly balances traditional hot rod styling with modern street rod influences. The interior of this 1930 Ford Model A Roadster Street Rod features a clean black cabin that complements the vibrant exterior finish. The simple layout remains faithful to the spirit of classic hot rods while incorporating modern conveniences for a more enjoyable driving experience. A JVC audio head unit and aftermarket sound system provide upgraded entertainment, while the bench seat offers comfortable accommodations for cruising. The result is an inviting cabin that successfully blends vintage charm with contemporary usability.
Engine
Powering this 1930 Ford Model A Roadster Street Rod is a 327ci V8 equipped with a 4-barrel carburetor and paired with a 3-speed automatic transmission. This proven small-block V8 configuration delivers strong performance, a distinctive exhaust note, and dependable operation. Power is sent to the rear wheels, preserving the traditional hot rod driving experience that enthusiasts have enjoyed for decades. The street rod chassis build enhances drivability and road manners beyond what was possible in the original Model A, while the aftermarket exhaust system ensures this custom Ford sounds every bit as exciting as it looks.
This 1929 Ford Model A Tudor Sedan Street Rod takes one of Ford’s most iconic early body styles and turns it into something far more rowdy. Showing just 470 miles, it blends upright Model A proportions with the ingredients enthusiasts expect from a traditional street rod: a 302ci V8, 4-barrel carburetor, automatic transmission, rear-wheel drive, aftermarket suspension, and a custom exhaust system. What really gives this car its personality, though, is the visual treatment. The Lilac Metallic finish, custom devil and flame airbrush artwork, black vinyl roof, chrome trim, and polished wheels make it the kind of hot rod that stands out immediately rather than trying to imitate a factory restoration. The rebuilt title brand should also be noted.
This 1930 Ford Model A Phaeton Hot Rod takes the simplicity of early Ford design and turns it into a traditional open-wheel hot rod with a strong period-inspired attitude. Finished in red over a tan interior, it is powered by a 350ci V8 topped with triple 2-barrel carburetors and paired with an automatic transmission. The chopped top has been removed, leaving a more open profile beneath the tan convertible soft top, while the exposed engine, staggered aftermarket wheels, dropped front axle, and side-exit exhaust give the car the unmistakable stance and mechanical presence enthusiasts expect from a classic hot rod build.
This 1931 Ford Model A 3-Window Coupe Hot Rod “Phantom” takes the unmistakable silhouette of an early Ford and transforms it into a fully customized, award-winning hot rod. Showing just 291 miles, the build centers around a custom “Phantom” 3-window coupe body mounted to a hand-built frame, with dramatic details including a suicide front end, custom flame graphics, skull grille artwork, and a purpose-built stance. Its 327ci V8, six-carburetor intake setup, Muncie 4-speed manual, side-exit exhaust, and staggered wheel-and-tire combination give the car the mechanical personality to match its appearance. Rather than simply recreating a traditional Model A, this build embraces the show-car side of American hot-rodding with extensive customization throughout.
This 1926 Ford Model T Roadster Hot Rod is a compact, old-school street rod built around one of hot rodding’s most recognizable early-Ford shapes. Showing approximately 5,979 miles, it combines a lightweight roadster body with V8 power, an automatic transmission, and a distinctly traditional custom presentation. The black exterior is contrasted by purple pinstriping and flame graphics, while extensive chrome and polished engine hardware gives the exposed powerplant plenty of visual impact. With its staggered wheel setup, side-exit exhaust, custom aluminum dashboard, and vivid purple accents, this Model T delivers the stripped-down, mechanical personality enthusiasts expect from a classic hot rod.
This 1929 Ford Model A Tudor Sedan Street Rod takes one of Ford’s most iconic early body styles and turns it into something far more rowdy. Showing just 470 miles, it blends upright Model A proportions with the ingredients enthusiasts expect from a traditional street rod: a 302ci V8, 4-barrel carburetor, automatic transmission, rear-wheel drive, aftermarket suspension, and a custom exhaust system. What really gives this car its personality, though, is the visual treatment. The Lilac Metallic finish, custom devil and flame airbrush artwork, black vinyl roof, chrome trim, and polished wheels make it the kind of hot rod that stands out immediately rather than trying to imitate a factory restoration. The rebuilt title brand should also be noted.
Few cars capture the spirit of American hot rodding quite like a 1933 Ford three-window coupe, and this 1933 Ford Model 40 3-Window Coupe Hot Rod leans fully into that tradition. Showing just 4,563 miles, it pairs the unmistakable proportions of a prewar Ford coupe with a seriously upgraded mechanical package centered around a 383ci stroker V8. Holley Sniper EFI, a 200-4R 4-speed automatic, four-wheel disc brakes, Vintage Air climate control, aftermarket instrumentation, and a fully reworked interior make this much more than a nostalgia piece. Finished in a custom Firehouse Red paint job, it has the stance, sound, and visual drama enthusiasts expect from a proper hot rod, while incorporating the kind of upgrades that make it far easier to enjoy beyond the show field.
This 1926 Ford Model T Roadster Hot Rod is a compact, old-school street rod built around one of hot rodding’s most recognizable early-Ford shapes. Showing approximately 5,979 miles, it combines a lightweight roadster body with V8 power, an automatic transmission, and a distinctly traditional custom presentation. The black exterior is contrasted by purple pinstriping and flame graphics, while extensive chrome and polished engine hardware gives the exposed powerplant plenty of visual impact. With its staggered wheel setup, side-exit exhaust, custom aluminum dashboard, and vivid purple accents, this Model T delivers the stripped-down, mechanical personality enthusiasts expect from a classic hot rod.
This 1929 Ford Model A Tudor Sedan Street Rod takes one of Ford’s most iconic early body styles and turns it into something far more rowdy. Showing just 470 miles, it blends upright Model A proportions with the ingredients enthusiasts expect from a traditional street rod: a 302ci V8, 4-barrel carburetor, automatic transmission, rear-wheel drive, aftermarket suspension, and a custom exhaust system. What really gives this car its personality, though, is the visual treatment. The Lilac Metallic finish, custom devil and flame airbrush artwork, black vinyl roof, chrome trim, and polished wheels make it the kind of hot rod that stands out immediately rather than trying to imitate a factory restoration. The rebuilt title brand should also be noted.
Few cars capture the spirit of American hot rodding quite like a 1933 Ford three-window coupe, and this 1933 Ford Model 40 3-Window Coupe Hot Rod leans fully into that tradition. Showing just 4,563 miles, it pairs the unmistakable proportions of a prewar Ford coupe with a seriously upgraded mechanical package centered around a 383ci stroker V8. Holley Sniper EFI, a 200-4R 4-speed automatic, four-wheel disc brakes, Vintage Air climate control, aftermarket instrumentation, and a fully reworked interior make this much more than a nostalgia piece. Finished in a custom Firehouse Red paint job, it has the stance, sound, and visual drama enthusiasts expect from a proper hot rod, while incorporating the kind of upgrades that make it far easier to enjoy beyond the show field.
Terms of Service
Be Kind and Courteous
We're here to create a platform to better the automotive industry through communication and transparency. Please treat everyone with respect. Healthy debates are natural, but kindness is required.
No Hate Speech
Make sure everyone feels safe. Hate speech of any kind is strictly prohibited. Degrading comments about things like race, religion, culture, sexual orientation, etc. will not be tolerated.
No Promotions or Spam
Give more than you take. Self-promotion, spam, or links of any kind are not allowed.
