- 1969 Ford Bronco Restomod
- 351ci V8
- 4-Barrel Carburetor
- 5-Speed Manual
- 4x4
- Blue Exterior
- Brown Interior
- Aftermarket Headers & High-Output Distributor
- Aftermarket Wheels
- Reupholstered Leather Interior
- Aftermarket Steering Wheel
- Aftermarket Transfer Case Shifter Knob
- Aftermarket Audio System
- Aftermarket Digital Gauges
- Integrated Roll Cage
- Winch Equipped
- ARB Switch Panel
- Swing-Out Tire Carrier
- Drop-Down Tailgate
- Hard Top Rear Hatch
- Integrated Interior Bench Seat
One of the best choices for a classic American four by four, a first generation Ford Bronco makes for a fine way to enjoy a weekend drive. Produced between 1966 and 1978, sales averaged well over 20,000 for a good year. In fact, this 1969 Ford Bronco Restomod is one of 20,956 made for the 1969 model year. Now, with a mere 35,199 miles on the clock, it’s up for sale in Landrum, South Carolina. Moreover, it’s received some aftermarket upgrades on the inside and out that make it suitable for regular driving too. So why not take a chance on this vehicle? Just talk to us and we’ll hook you up.
Exterior and Interior
This 1969 Ford Bronco Restomod comes in blue and includes the removable hard top that made the Bronco popular. Some classic Broncos come with soft tops or no top, but this example retains the hard top, as well as the integrated roll cage that offers protection when driving without the top in place. You’ve also got a drop-down tailgate, a hardtop rear hatch and even a winch to help get you out of sticky situations. Not that you’re likely to get in many of those, thanks to the vehicle’s proper four-wheel drive system and correct tires for adventuring. These are wrapped around silver alloy wheels for extra street cred. At the front, you’ve got a brush guard as well as head lamp protectors. Meanwhile, the rear also hosts a swing-out spare tire carrier. The brown interior of this 1969 Ford Bronco Restomod has reportedly been reupholstered in leather. It’s a nice place to live in, thanks to the aftermarket digital gauges and audio system. You’ve got two front seats and a rear bench, plus ample cargo capacity for road trips. This goes to show how much can be done in a two-door body, after all.
Engine
This 1969 Ford Bronco Restomod comes with a 351ci V8 that uses a 4-barrel carburetor. We’re also told that there are aftermarket headers, a high-output distributor and an aftermarket transfer case shifter. Power goes to all four wheels through a 5-speed manual transmission for maximum control on and off road.
Built with serious trail capability in mind, this 2023 Ford Bronco Badlands 4-Door Advanced 4x4 combines one of the Bronco lineup’s most off-road-focused trims with the desirable Sasquatch Package and 2.7L EcoBoost V6. Showing approximately 33,677 miles, this example is finished in Oxford White over Vinyl Black seats and is equipped with Equipment Group 333A, including the Mid and High Packages. Highlights include 35-inch mud-terrain tires, 17-inch black aluminum beadlock-capable wheels, electronically locking front and rear differentials, a 4.7 final drive ratio, the heavy-duty modular front bumper, rock rails, and a molded-in-color hard top. The result is a Bronco configured with the hardware enthusiasts typically look for when capability matters as much as everyday usability.
The Ford Bronco made its long-awaited return with a clear mission: combine the open-air personality of the original Bronco with the technology and off-road hardware expected of a modern 4x4. This 2023 Ford Bronco Badlands Advanced takes that formula further with the desirable Sasquatch Package and Equipment Group 332A, giving it a decidedly trail-focused specification straight from the factory. Finished in Azure Gray Metallic Tri-Coat over a Black leather-trimmed/vinyl interior, it pairs serious off-road equipment with everyday usability. With approximately 27,561 miles on the odometer, this Bronco is equipped with the 2.7L twin-turbocharged EcoBoost V6, a 10-speed automatic transmission, front and rear electronic locking differentials, beadlock-capable wheels, and a removable molded-in-color hard top.
With 116,019 miles, this 1995 Ford Bronco XLT represents the final generation of Ford’s iconic full-size SUV platform before production ended in 1996. Combining classic 4x4 capability with the comfort and practicality of the XLT trim, this Bronco is powered by the desirable 5.8L V8 and equipped with a removable rear hardtop that preserves the open-air versatility these trucks are known for. Finished in red with a gray cloth interior, this example has been customized with an upgraded suspension setup, aftermarket springs, and aftermarket shocks. According to the current owner, the Bronco has received a custom paint job in its original color and underwent removal of all undercarriage rust, making it a compelling example of Ford’s legendary off-road SUV.
This 1930 Ford Model A Coupe Street Rod is the kind of build that rewards a closer look, because the craftsmanship underneath is every bit as important as the period hot-rod silhouette above it. Showing approximately 1,788 miles, this custom rotisserie-built coupe pairs a 350ci Goodwrench V8 crate engine with GM electronic fuel injection and a TH350 3-speed automatic transmission, giving the car the response and reliability of a much newer setup without taking away from its traditional street-rod character. The chassis has been thoroughly reworked with a custom fully boxed frame, Ford 9-inch rear end, rack-and-pinion steering, power front disc brakes, and rear 4-link suspension with coilovers. Finished in two-tone Gray and Silver over a Gray and Charcoal interior, it also wears Magnum 500 wheels with Coker Classic whitewalls and carries a red-accented undercarriage that turns the underside into part of the show.
This 1932 Ford Model 18 5-Window Coupe Hot Rod is an all-steel, heavily customized build that combines authentic early-Ford architecture with the unmistakable performance character of a 1969 Corvette-sourced 427ci Big-Block Chevrolet V8. Showing approximately 6,977 miles, the car was conceived as a one-of-one creation rather than a conventional street rod, with virtually every major component selected or engineered around its distinctive combination of vintage Henry Ford steel and big-block Chevrolet power. Its all-steel 1932 Ford 5-window body has been given a dramatic 4-inch roof chop, producing the low, aggressive profile at the heart of the build, while the fenderless front end, exposed suspension, deep-dish Cragar S/S wheels, front skinnies, and substantial rear performance rubber reinforce its traditional hot-rod attitude. Beneath the body is a custom fully boxed aftermarket frame designed to cope with the torque of the 427, backed by a heavy-duty TH400 automatic and Ford 9-inch rear axle. According to the seller, the car has also received significant publicity and attracted attention from collectors, further separating it from the typical home-built street rod.
By 1969, the Shelby GT350 had evolved from the raw, competition-minded Mustang of the mid-1960s into something broader in character: still unmistakably performance-focused, but now with the presence and comfort of a true high-speed grand tourer. This 1969 Ford Mustang Shelby GT350 shows approximately 80,436 miles and wears Black Jade over a Black interior with red seat accents, a combination that suits the car’s more mature personality especially well. Its Shelby identity is everywhere, from the functional twin-scoop fiberglass hood and Cobra-branded grille to the side scoops, GT350 graphics, rear decklid spoiler, Shelby Automotive identification plate, and Carroll Shelby signature across the passenger-side dash. Underneath, the 351ci Windsor V8, SelectShift Cruise-O-Matic automatic, and 3.25:1 Traction-Lok rear axle give it the kind of effortless V8 pace expected from a late-1960s Shelby, while power steering, power-assisted front disc brakes, and air conditioning make this example as much a road-going GT as it is a muscle car. It is a fitting snapshot of the moment when Shelby Mustangs became less about stripped-down competition and more about combining speed, style, and long-distance usability.
The Mercedes-Benz 250GD Wolf comes from a very different branch of G-Wagen history than the luxury-focused models most enthusiasts know today. Built for military use, the Wolf prioritized simplicity, durability, and off-road capability, and this 1992 example preserves that utilitarian character while incorporating a number of thoughtfully executed upgrades. Showing approximately 45,122 miles, it is finished in Mercedes-Benz OEM Desert Sand paint with a matte clear coat over a Black interior with Desert Sand piping. Its specification includes a 2-door military-convertible body, dual-range transfer case, independently locking front and rear differentials, 5-speed manual with crawler first gear, 24-volt electrical system, folding windshield, and military-style exterior mirrors. Custom additions such as the Canadian G-Wagen-inspired front bull bar, Black Rhino wheels, 33x12.50 mud-terrain tires, Rhino-lined body tub, and German-made tops give this Wolf an even stronger expedition-ready presence without losing sight of its original military identity.
This 1956 Chevrolet 3100 Stepside Restomod takes the unmistakable shape of Chevrolet’s Task Force-era pickup and pairs it with a thoroughly modernized performance package. Showing approximately 28,601 miles, this build is powered by a supercharged 5.0L Coyote V8 with electronic fuel injection and a Roush supercharger, sending power to the rear wheels through an automatic transmission. Finished in black over a beige interior, it also benefits from a reupholstered cabin, aftermarket digital gauges, a Pioneer audio head unit, custom wood bed flooring, and aftermarket wheels. It is a strong blend of vintage truck styling and contemporary performance hardware.
This 1982 Jeep CJ-7 represents the classic Jeep formula taken to an enthusiast level, combining vintage 4x4 character with a comprehensive off-road build. Showing approximately 4,831 miles since the build, this CJ-7 has been extensively upgraded with a reinforced and powder-coated frame, Mountain Off-Road Enterprises suspension components, upgraded axles, four-wheel disc brakes, and a strengthened drivetrain designed for serious trail use. Finished in white with a black interior, it features a Clifford Performance blueprinted 292ci inline-six, NV4500 5-speed manual transmission, Atlas transfer case, MasterCraft Baja RS suspension seats, and a long list of purpose-built improvements. With the current owner reporting approximately 4 inches of additional width over stock axles and only a few thousand miles since completion, this CJ-7 represents a highly customized interpretation of Jeep’s legendary open-air 4x4 platform.
Terms of Service
Be Kind and Courteous
We're here to create a platform to better the automotive industry through communication and transparency. Please treat everyone with respect. Healthy debates are natural, but kindness is required.
No Hate Speech
Make sure everyone feels safe. Hate speech of any kind is strictly prohibited. Degrading comments about things like race, religion, culture, sexual orientation, etc. will not be tolerated.
No Promotions or Spam
Give more than you take. Self-promotion, spam, or links of any kind are not allowed.
