- 1932 Ford Dearborn Deuce Roadster Highboy Hot Rod
- Roush 351 Windsor V8
- 4-Barrel Carburetor
- Tremec 5-Speed Manual
- RWD
- Deep Midnight Blue Metallic Exterior
- Saddle Tan Leather Interior
- Custom Flame Graphics
- MSD Electronic Ignition
- Polished Billet Aluminum 5-Spoke Wheels
- Wilwood 4-Wheel Disc Brakes
- Dual Polished Side Exit System
- Re-Upholstered Interior
- Custom Boxed Chassis
- Custom Independent Front Suspension, Coilover Rear Suspension
Ford’s 1932 range was an all-new line-up of three variants, namely Model B, Model 18 and Model 40. Succeeding the successful Model A, the 1932 range was made in many forms, including as a two and four door sedan (Tudor and Fordor in Ford speak), the Deuce two-door coupe which was a name reserved for 1932 models only, a convertible, and even a pickup truck-styled body for load carrying. Today, these Thirties Fords have found a new life as being platforms for some pretty diverse hot rods. Take this South Carolina-based 1932 Ford Model B Dearborn Deuce Roadster Highboy Hot Rod as an example. It’s got a powerful Roush 351 Windsor V8 under the hood, a Tremec gearbox, Wilwood brakes and style that will take your breath away. Talk to us if you’d like to give this 3,649-mile baby a home.
Exterior and Interior
Lowered and chopped, this 1932 Ford Model B Dearborn Deuce Roadster Highboy Hot Rod flaunts itself with a Deep Midnight Blue Metallic coat of paint, and rides upon a set of shiny silver polished aluminum aftermarket wheels. You’ve got some neat custom flame graphics along the side, as well as some chrome elements here and there. The car’s convertible roof comes in tan, and when erected, really shows off that low-riding stance. Meanwhile, a pair of dual polished side exit exhausts really bring that Windsor grumble to life when on the move. The interior of this 1932 Ford Model B Dearborn Deuce Roadster Highboy Hot Rod comes with Saddle Tan leather and has reportedly been reupholstered. You’ve got a custom gauge cluster in the center of the dashboard with some nice retro-modern gauges, while the tachometer has been placed lower down, by the driver’s knee. There’s an aftermarket gear shifter as well, celebrating the seventy fifth anniversary of the Deuce, a chunky steering wheel and a set of sporty pedals.
Engine
Powering this 1932 Ford Model B Dearborn Deuce Roadster Highboy Hot Rod is a 351ci Windsor V8 from Roush, breathing through a 4-barrel carburetor. That means you’ve got some proper power under your right foot, and you control its release to the rear axle via a Tremec 5-speed manual gearbox. The car also has Wilwood 4-wheel disc brakes, a custom boxed chassis, MSD ignition and custom independent front suspension. Even the rear suspension has been upgraded to the coilover type.
Classic hot rod styling never goes out of fashion, and this 1932 Ford Model B Roadster Hot Rod is a perfect example of why enthusiasts continue to gravitate toward the iconic Deuce Ford. Showing approximately 18,125 miles, this professionally built roadster combines timeless pre-war design with proven small-block Chevrolet V8 performance and modern driving manners. Finished in an elegant Cream and Rose Gold color combination over a Tan leather interior, this custom build captures the spirit of traditional American hot rodding while offering the comfort and reliability expected from a contemporary cruiser. With its fiberglass roadster body, rumble seat, chrome wire wheels, and extensive brightwork, this Ford is equally suited for local cruise nights, weekend shows, or leisurely drives on scenic back roads.
The 1932 Ford Highboy is one of the foundational shapes of American hot-rodding, and this Factory Five custom build delivers that icon with unmistakable show-car attitude. With approximately 5,107 miles since its build, this 1932 Ford Model B Roadster “Highboy” Hot Rod combines a bright Yellow finish, exposed mechanical character, a carbureted Chevrolet small-block, and the pure open-air excitement that makes a fenderless roadster impossible to ignore. It is not subtle, and it absolutely should not be.
For generations of hot rod enthusiasts, the 1933 Ford 3-Window Coupe has represented one of the most desirable foundations for a custom build. Its sweeping fenders, chopped-looking roofline, and unmistakable grille have made it an icon of American street rodding, inspiring countless award-winning creations. This 1933 Ford Model B 3-Window Coupe Hot Rod takes that legendary formula and pairs it with the durability of a Gibbon Fiberglass Reproductions body, a proven Chevrolet 350ci V8, and modern amenities that make it far more enjoyable to drive than an original. Showing approximately 3,702 miles since completion, this black coupe with custom flame graphics is equally suited for weekend cruises, national rod runs, or earning attention wherever it parks.
This 1930 Ford Model A Coupe Street Rod is the kind of build that rewards a closer look, because the craftsmanship underneath is every bit as important as the period hot-rod silhouette above it. Showing approximately 1,788 miles, this custom rotisserie-built coupe pairs a 350ci Goodwrench V8 crate engine with GM electronic fuel injection and a TH350 3-speed automatic transmission, giving the car the response and reliability of a much newer setup without taking away from its traditional street-rod character. The chassis has been thoroughly reworked with a custom fully boxed frame, Ford 9-inch rear end, rack-and-pinion steering, power front disc brakes, and rear 4-link suspension with coilovers. Finished in two-tone Gray and Silver over a Gray and Charcoal interior, it also wears Magnum 500 wheels with Coker Classic whitewalls and carries a red-accented undercarriage that turns the underside into part of the show.
This 1932 Ford Model 18 5-Window Coupe Hot Rod is an all-steel, heavily customized build that combines authentic early-Ford architecture with the unmistakable performance character of a 1969 Corvette-sourced 427ci Big-Block Chevrolet V8. Showing approximately 6,977 miles, the car was conceived as a one-of-one creation rather than a conventional street rod, with virtually every major component selected or engineered around its distinctive combination of vintage Henry Ford steel and big-block Chevrolet power. Its all-steel 1932 Ford 5-window body has been given a dramatic 4-inch roof chop, producing the low, aggressive profile at the heart of the build, while the fenderless front end, exposed suspension, deep-dish Cragar S/S wheels, front skinnies, and substantial rear performance rubber reinforce its traditional hot-rod attitude. Beneath the body is a custom fully boxed aftermarket frame designed to cope with the torque of the 427, backed by a heavy-duty TH400 automatic and Ford 9-inch rear axle. According to the seller, the car has also received significant publicity and attracted attention from collectors, further separating it from the typical home-built street rod.
By 1969, the Shelby GT350 had evolved from the raw, competition-minded Mustang of the mid-1960s into something broader in character: still unmistakably performance-focused, but now with the presence and comfort of a true high-speed grand tourer. This 1969 Ford Mustang Shelby GT350 shows approximately 80,436 miles and wears Black Jade over a Black interior with red seat accents, a combination that suits the car’s more mature personality especially well. Its Shelby identity is everywhere, from the functional twin-scoop fiberglass hood and Cobra-branded grille to the side scoops, GT350 graphics, rear decklid spoiler, Shelby Automotive identification plate, and Carroll Shelby signature across the passenger-side dash. Underneath, the 351ci Windsor V8, SelectShift Cruise-O-Matic automatic, and 3.25:1 Traction-Lok rear axle give it the kind of effortless V8 pace expected from a late-1960s Shelby, while power steering, power-assisted front disc brakes, and air conditioning make this example as much a road-going GT as it is a muscle car. It is a fitting snapshot of the moment when Shelby Mustangs became less about stripped-down competition and more about combining speed, style, and long-distance usability.
This 1930 Ford Model A Coupe Street Rod is the kind of build that rewards a closer look, because the craftsmanship underneath is every bit as important as the period hot-rod silhouette above it. Showing approximately 1,788 miles, this custom rotisserie-built coupe pairs a 350ci Goodwrench V8 crate engine with GM electronic fuel injection and a TH350 3-speed automatic transmission, giving the car the response and reliability of a much newer setup without taking away from its traditional street-rod character. The chassis has been thoroughly reworked with a custom fully boxed frame, Ford 9-inch rear end, rack-and-pinion steering, power front disc brakes, and rear 4-link suspension with coilovers. Finished in two-tone Gray and Silver over a Gray and Charcoal interior, it also wears Magnum 500 wheels with Coker Classic whitewalls and carries a red-accented undercarriage that turns the underside into part of the show.
This 1932 Ford Model 18 5-Window Coupe Hot Rod is an all-steel, heavily customized build that combines authentic early-Ford architecture with the unmistakable performance character of a 1969 Corvette-sourced 427ci Big-Block Chevrolet V8. Showing approximately 6,977 miles, the car was conceived as a one-of-one creation rather than a conventional street rod, with virtually every major component selected or engineered around its distinctive combination of vintage Henry Ford steel and big-block Chevrolet power. Its all-steel 1932 Ford 5-window body has been given a dramatic 4-inch roof chop, producing the low, aggressive profile at the heart of the build, while the fenderless front end, exposed suspension, deep-dish Cragar S/S wheels, front skinnies, and substantial rear performance rubber reinforce its traditional hot-rod attitude. Beneath the body is a custom fully boxed aftermarket frame designed to cope with the torque of the 427, backed by a heavy-duty TH400 automatic and Ford 9-inch rear axle. According to the seller, the car has also received significant publicity and attracted attention from collectors, further separating it from the typical home-built street rod.
This 1939 Ford Deluxe Tudor Sedan Street Rod brings together classic prewar Ford styling, custom hot-rod craftsmanship, and a notable build pedigree. Showing approximately 20,140 miles, this example was built by Boyd Coddington and featured on American Hot Rod, giving it a level of provenance that sets it apart from a typical custom street rod. Finished in red over a tan interior, it is powered by a 350ci V8 with a Holley 4-barrel carburetor and automatic transmission. Additional highlights include a shaved body, Mustang II front suspension, rack-and-pinion steering, Wilwood disc brakes, Boyd Coddington wheels, and a reupholstered interior.
Terms of Service
Be Kind and Courteous
We're here to create a platform to better the automotive industry through communication and transparency. Please treat everyone with respect. Healthy debates are natural, but kindness is required.
No Hate Speech
Make sure everyone feels safe. Hate speech of any kind is strictly prohibited. Degrading comments about things like race, religion, culture, sexual orientation, etc. will not be tolerated.
No Promotions or Spam
Give more than you take. Self-promotion, spam, or links of any kind are not allowed.
