The Chevrolet C/K Series of pickup trucks was introduced in 1960, and is the sister of the GMC C/K Series. General Motors knew that by sharing platforms, engines and other mechanical componentry across brands, they could realize synergies and enhanced economies of scale. This is seen today, with the Chevy Silverado and GMC Sierra duo. Here, we have a 1970 GMC C2500 Fleetside which comes from the second generation of the Chevy/GMC C/K-Series line-up. This era ran between 1967 and 1972, with the trucks assembled in a variety of places across the country. This particular truck comes from Hemingford, Nebraska and is a two-wheel drive variant, denoted by its C moniker. Furthermore, its 2500 designation tells us that it’s a ¾-ton truck. If you’re on the lookout for a classic American truck with some capability but in great condition for showing off as well, this is the ideal candidate to pick.
This 1970 GMC C2500 Fleetside shows off its lines in a suit of bronze paint. The truck appears to have undergone a repaint, and rides on a set of shiny silver wheels. These are wrapped in chunky General Grabber tires. Then, you’ll see the requisite GMC badging at the front and rear, as well as quad headlamps, side marker lamps and chromed bumpers. The cargo bed also seems to be in great condition. The two-tone interior of this truck appears to have been redone in some places. It’s got a control panel for air conditioning and heating, plus a GM-branded push-button radio. There’s a broad bench seat that can carry up to three adults, wind-up windows and thin pillars for a superbly airy experience. Yes, these trucks come from a simpler time when cruising in peace was important and digital distractions were unheard of.
A 350ci V8 beats beneath the hood of this 1970 GMC C2500 Fleetside. It’s likely a small block with a 2-barrel carburetor reportedly rated at 250hp and 350lb-ft. Remember that these trucks were meant for load-lugging rather than dragstrip decimating. An automatic transmission and rear-wheel drive are standard.
The Chevrolet C/K Series of pickup trucks was introduced in 1960, and is the sister of the GMC C/K Series. General Motors knew that by sharing platforms, engines and other mechanical componentry across brands, they could realize synergies and enhanced economies of scale. This is seen today, with the Chevy Silverado and GMC Sierra duo. Here, we have a 1970 GMC C2500 Fleetside which comes from the second generation of the Chevy/GMC C/K-Series line-up. This era ran between 1967 and 1972, with the trucks assembled in a variety of places across the country. This particular truck comes from Hemingford, Nebraska and is a two-wheel drive variant, denoted by its C moniker. Furthermore, its 2500 designation tells us that it’s a ¾-ton truck. If you’re on the lookout for a classic American truck with some capability but in great condition for showing off as well, this is the ideal candidate to pick.
Today, the GMC Sierra 1500 is known as quite a sizeable light-duty pickup, but it started its life as a much different square-body pickup. The early GMC Sierra shared its platform with the Chevrolet C/K, offering a silhouette that has been embedded in American car culture. Our featured car has been extensively upgraded, but visually and under the hood. This 1986 GMC C1500 Sierra Classic features a monster of a motor powering it: a blueprinted 355ci V8 Crate engine. With a reported 21,500 miles, this stunning pickup could be a brilliant addition to anyone’s automotive arsenal.
The Chevrolet C/K Series of pickup trucks was introduced for the 1960 model year and ran until 2002, when the Silverado series took over. GMC also got in on the action with badge-engineered variants, such as this 1971 GMC C1500 from the second generation of the model series. However, this isn’t just another C1500, but a fine restomod with some great modern creature comforts to make it a pleasant daily driver, as well as a showstopper.
The Chevrolet C/K Series of pickup trucks was introduced in 1960, and is the sister of the GMC C/K Series. General Motors knew that by sharing platforms, engines and other mechanical componentry across brands, they could realize synergies and enhanced economies of scale. This is seen today, with the Chevy Silverado and GMC Sierra duo. Here, we have a 1970 GMC C2500 Fleetside which comes from the second generation of the Chevy/GMC C/K-Series line-up. This era ran between 1967 and 1972, with the trucks assembled in a variety of places across the country. This particular truck comes from Hemingford, Nebraska and is a two-wheel drive variant, denoted by its C moniker. Furthermore, its 2500 designation tells us that it’s a ¾-ton truck. If you’re on the lookout for a classic American truck with some capability but in great condition for showing off as well, this is the ideal candidate to pick.
The GMT400-generation GMC Sierra is remembered for its durability, clean styling, and capability, offering a blend of workhorse toughness and daily comfort. This 1995 GMC Sierra 1500 SL, finished in Dark Garnet Red Metallic over a burgundy interior, is powered by a 5.7-liter naturally aspirated V8 with throttle-body injection, paired to a 4-speed automatic transmission and selectable four-wheel drive. Showing 117,297 miles, it comes equipped with a Convenience Package, power features, and a sliding glass sunroof, making it both practical and comfortable while retaining the charm of a mid-1990s American pickup.
GMC and Chevy have been making pickup trucks together for ages. In fact, this stretches way back to the Chevy Task Force series and beyond. When the popular Chevy C/K series debuted in 1960, naturally, GMC would get its own variants. The GMC 1000 was the half-ton variant, equivalent to a Chevy C10 or K10. In terms of mechanicals and styling, the models were basically indistinguishable except for badging, unlike today, where the Chevy Silverado and GMC Sierra have some visual differences. However, this 1966 GMC 1000 Fleetside is definitely a stand-out sort, because it’s a restomod. Packing a potent engine and some neat creature comforts, you could be the next lucky owner of this beauty. But you’d better act fast!
This 1966 Ford F-250 Crown Crew Cab 4×4 is a rare example of a purpose-built heavy-duty truck ordered with both specialized coachwork and Ford’s upscale Custom Cab specification. Unlike the standard fleet-grade bodies typically used for Crown conversions, this truck was built on a F-250 platform and equipped from new with the 81B Custom Cab package, pairing a four-door Crown-built body with Ford’s highest interior trim of the period. A comprehensive, factory-correct restoration was carried out with the singular goal of returning the truck precisely to its original 1966 configuration rather than modernizing or reinterpreting it. The combination of Custom Cab trim, Crown coachwork, faithfully recreated upholstery materials, and original-style factory air conditioning places this truck among the most authentic Crown crew cab F-250s known, supported by Hemmings documentation and minimal mileage since completion.
The OG Hummer, the AM General Humvee is the military variant on which the entire Hummer brand was created around, at the request of Arnold Schwarzenegger. Having encountered these vehicles in movies, it’s no surprise that The Terminator fell in love with them. Of course, at that time, the only way a civilian could expose themselves to a Humvee in the capacity of driving it was to likely join the military. Now, you can find plenty of old, ex-service Humvees entering civilian life after they retire from active duty. This 1987 AM General Humvee M998 is one such candidate, and it’s got just 37,300 miles to its name. But that’s not important, what matters is how it’s been tastefully customized. You’ve got a Tropical Blue repaint, a custom navy and white Sunbrella top, a diesel V8 under the hood, and so much more to appreciate. Hard to imagine, isn’t it, that this was once a military troop transport!
Today, RAM is a stand-alone brand of pickup trucks and well-known for its versatile array of tough, capable and yes, luxurious offerings in the full-size, medium-duty and heavy-duty segments. But before 2010, RAM was merely a model under the Dodge hierarchy, and the trucks were known as the Dodge Ram. That’s what we have here, a 1997 Dodge Ram 2500 LT for sale from Baytown, Texas. This is a second-generation Dodge RAM and it’s done 154,788 miles so far. With its Cummins turbodiesel six, manual gearbox and replaced interior, it’s the ideal truck for someone looking for a decent workhorse, as well as a person who wants something a little different from the Nineties. Contact us if you fit the bill.
We're here to create a platform to better the automotive industry through communication and transparency. Please treat everyone with respect. Healthy debates are natural, but kindness is required.
Make sure everyone feels safe. Hate speech of any kind is strictly prohibited. Degrading comments about things like race, religion, culture, sexual orientation, etc. will not be tolerated.
Give more than you take. Self-promotion, spam, or links of any kind are not allowed.
Wholesale
Direct Deal
Upload Inspection
Order Inspection
Modern Vehicle Finance
Classic Vehicle Finance
Document Request
Autrella Rates
60 Days - $999
90 Days - $1499